Home • Phoenix TL Buildings • Components • Phoenix Legend • Site Map • Contact Us

**NOTE** WE ARE NOT AFFILIATED WITH STEELOX SYSTEMS, L.L.C.  STEELOX is a registered trademark of Metal Building Components, L.P. ("MBCI").  Our services and products are not affiliated with or sponsored by MBCI.

We are your source for component parts for repair or remodel of your Armco / Steelox brand metal building

We carry a full line of NON-ENGINEERED Component parts to repair or remodel your existing Armco / Steelox brand building.

   DOOR JAMB CLIP           BASE CHANNEL     GUTTER END CAP       

We have acquired most of the actual dies and jigging direct form the factory to manufacture our parts, along with a large quantity of finished goods. 

      JIM CLIP                               DOOR DRIP LINTEL        SCULPTURE PANEL FOAM PLUG

Odds are that we have in stock what you are looking for.  We have the ability to fabricate component parts that will seamlessly match your existing Armco or Steelox building.

Base Channel and Zee ; Foam Closures ; Doors (Framing, Hardware, Leafs) ; Windows (Framing & Glass) ; Fasteners ; Clips; Sealants ; Fascia; Gutter; Ridge ; Eave Trim ;  Supports, Stiffeners ; Overhead door CFO's ; Thresholds ; Louvers ;  Pipe Flashings ; Downspouts ; Lintels ; Gutter hangers , and much more...

If we do not have your part in stock, we can make it for you. 

Advantages of our component parts:

1. Our component parts are made to the same or higher quality than the original factory OEM parts.
2. In many cases we can match exact original factory finishes without the large quantity.
3. We have a deep inventory of parts that are commonly used for repair & remodel.
4. We have the knowledge to know what these parts are intended for and have installed them ourselves many times.
5. Some of our parts are even original Factory parts.

TERMS: 

	Payment Charge (Visa, & Master Card) Cashiers Check Cash Company Check (Will ship when funds clear.  Please allow ample lead time when using this method)
	Freight / Shipping:   F.O.B. Thornton, CO 80241 Buyer responsible for shipping from 12520 Grant Drive #100 Thornton, CO 80241.  Local Pickup is OK.   Please call 24 hours in advance.
	Applicable taxes will be added to your quote
	Installation not by Phoenix Building Systems, L.L.C.

I DON'T KNOW WHAT PART NUMBER I NEED?

We can trace down parts in multiple ways. 

	By 5-digit Steelox part number.  (Number is usually tagged, stenciled, written, or stamped into individual parts.)
	By Steelox Group number + Part Number
	Copy of your Armco / Steelox erection drawings showing parts required.
	The original builder's name and Contact information.   More often than not builders will have a copy on hand of your building's drawings and the parts that were used.
	A good old fashioned brief description of what it is you're looking for.  We understand that you might not understand our business and we are willing to assist you.
	A picture is worth a thousand words...  Take a digital photograph and e-mail it to us as an attachment.  Make sure you include a relevant subject or call us before you use this option.  Many times e-mails that we do not recognize as legitimate will be deleted, especially those with attachments.  Sorry for the inconvenience
	Last resort: Contact us and we can talk about what it is... your part may have been discontinued and not have a part number; however, we can still replicate these parts in many cases.

We cannot track down your required parts by:

	Your original order number:  This number usually begins with a "W" and is chalked onto structural columns & rafters.
	Your original builder's Steelox builder number
	Your building's ship week or date, and/or date of erection.
	Part #'s off of similar non-Steelox / Armco Buildings, however sometimes these parts are interchangeable.   Please contact us first if you have a hybrid system or a building by a different manufacturer.

Notice!!  Our component parts are solely intended to be sold as non-engineered component parts.  PHOENIX BUILDING SYSTEMS, L.L.C. assumes no liability for improper installation and or structural failure due to the replacement or remodel of existing structures.  Although these parts are made to replicate the original parts we cannot guarantee structural integrity of your building.  Our parts are purchased individually and not as a part of any engineered system.  Our component parts are guaranteed to fit correctly within your existing Steelox / Armco brand  building; however, PHOENIX BUILDING SYSTEMS, L.L.C. assumes no responsibility as to the engineering properties nor can guarantee or provide engineering data of these parts.

PHOENIX BUILDING SYSTEMS, L.L.C. is not affiliated with Armco or Steelox in any way.                    

 Steelox is a registered trademark of Metal Building Components, L.P. ("MBCI").  Our services and products are not affiliated with or sponsored by MBCI.

Please Read our Privacy & Legal Disclaimer.  Product Brand names and/or logos either mentioned or shown on these pages are property of their respective companies.  ©2008 PHOENIX BUILDING SYSTEMS, L.L.C.. All Rights Reserved

Links