|
|
|
|
Here is a list and profile of panels you may have on your existing building. Note dimensions shown are only approximate. This guide is used to identify your panel type only. These are the most common types of wall panels. If you cannot identify your panel, please fax or e-mail a sketch of the profile of your panel. There are many other older styles of panels that are not listed here. WALL PANELS CFW PANEL - 16" Wide 3" deep with embossed surface and pre-punched back legs for bolted connection from the inside. No fasteners will be visible from the outside of this panel. Please look at our CFW Color guide for current color availability in these panels.
STANDARD:
FLAT:
CORNER:
12" PANEL:
DL-1 / SL-2 - Thru fastened panel, either smooth or embossed surface. DL-1 has major ribs to exterior, SL-2 is reversed. This panel was also used as an interior liner panel and also roof panel.
SVR-Countour Thru fastened semi-concealed fastener panel. Smooth or embossed finish.
ARW-IV This is an older style panel that was discontinued back in the mid 1980's
Econ-O-Panel This is an older style panel discontinued back in the 1970's. This panel was used as a wall panel and also a roof panel.
TW-100 - This is an insulated wall panel, providing exterior and interior finishes in one. Surface has light striations and an embossed surface.
ROOF PANELS
LRX 2" or 3" (2" Shown) -Very common standing seam roof panel. This came in two varieties 2" high ribs (shown) and 3" high ribs. If you have a self framing building this panel may be up to 18 ga thick. This profile in 2" high rib was available with pencil ribs on the bottom pan (PRX) not shown. Note extra hook shown on this profile on female leg was added in fall 1997.
XTR
DL-1 (see above wall panel image)
|
|
Please Read our Privacy & Legal Disclaimer. Product Brand names and/or logos either mentioned or shown on these pages are property of their respective companies. ©2008 PHOENIX BUILDING SYSTEMS, L.L.C.. All Rights Reserved |
